作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2006, Vol. 32 ›› Issue (16): 224-226,. doi: 10.3969/j.issn.1000-3428.2006.16.086

• 工程应用技术与实现 • 上一篇    下一篇

基于PDM的虚拟维修性分析评价系统与数据管理

梁伟杰1;郝建平1;刘安清2;吕剑峰1   

  1. 1. 军械工程学院维修工程研究所,石家庄 050003;2. 北京航天航空大学14系,北京 100083
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-08-20 发布日期:2006-08-20

Integration and Data Management of VMSAS Based on PDM

LIANG Weijie1;HAO Jianping1;LIU Anqing2;LV Jianfeng1   

  1. 1. Maintenance Engineering Institute, Ordnance Engineering College, Shijiazhuang 050003; 2. The 14th Department of Beijing University of Aeronautics & Astronautics, Beijing 100083
  • Received:1900-01-01 Revised:1900-01-01 Online:2006-08-20 Published:2006-08-20

摘要: 针对虚拟维修性分析评价系统(VMSAS)使用过程中的数据共享与获取管理、一致性控制、安全性管理等问题,提出了基于产品数据管理(Product Data Management, PDM)系统的系统集成与数据管理方案,并选择TeamCenter系统进行了数据及技术信息的合理分类、组织、存储与管理等方案的实现。设计了VMSAS与PDM解决方案TeamCenter的系统集成方案,并对接口系统的设计实现和关键技术进行了讨论。

关键词: 虚拟维修仿真, PDM, 系统集成

Abstract: Pointing at the problem in the process of using virtual maintainability analysis and evaluation system (VMSAS), such as the data sharing and access management, coherent control and security management, a system integration and data management project based on the product data management (PDM) system is put forward including the reasonable classification, organization, storage and management of data and technical information. A system integration project is come out between VMSAS and a PDM solution -TeamCenter, the realization and the key technology of the interface system are given.

Key words: Virtual maintenance simulation, PDM, System integration

中图分类号: