作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2006, Vol. 32 ›› Issue (17): 259-261. doi: 10.3969/j.issn.1000-3428.2006.17.092

• 工程应用技术与实现 • 上一篇    下一篇

建筑企业信息系统RUP裁剪模型及其应用研究

陆永忠1;陆永祥2;胡 亮1   

  1. 1. 华中科技大学软件学院,武汉430074;2. 武钢二医院信息中心,武汉430085
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-09-05 发布日期:2006-09-05

Study on Applying RUP to Develop Information System of Construction Enterprise

LU Yongzhong1;LU Yongxiang 2;HU Liang 1   

  1. 1. School of Software Engineering, Huazhong University of Science and Technology, Wuhan 430074; 2. Information Center of Second People’s Hospital of Wuhan Steel and Iron Corporation, Wuhan 430085
  • Received:1900-01-01 Revised:1900-01-01 Online:2006-09-05 Published:2006-09-05

摘要: 在分析和研究RUP开发方法及大中型建筑企业项目特点的基础上,建立了一种面向建筑企业信息系统的RUP裁剪模型,最后将该模型应用到一个具体的建筑企业信息系统的开发过程中,取得了良好的效果。

关键词: Rational统一过程, 建筑企业信息系统, 裁剪模型

Abstract: Based on the sufficient analysis and study of Rational unified process(RUP) method and project characteristics of large and medium construction enterprise, a RUP cutting model which is oriented the information system in construction enterprise. And then the model is applied to a concrete example of information system in construction enterprise. The good effect is finally achieved and proves the model is practicable and beneficial to develop information system in construction enterprise.

Key words: Rational unified process(RUP), Information system of construction enterprise, Cutting model