作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2006, Vol. 32 ›› Issue (22): 225-226. doi: 10.3969/j.issn.1000-3428.2006.22.080

• 工程应用技术与实现 • 上一篇    下一篇

InTouch在冷轧机控制系统中的设计和应用

安连祥1,蔡召君1,张少如2,孙子昕3,肖 歌3   

  1. (1. 河北工业大学电气与自动化学院,天津 300130;2. 河北师范大学物理科学与信息工程学院,石家庄 050016; 3. 北京北整意安机电设备公司,北京 100055)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-10-20 发布日期:2006-10-20

Design and Application of InTouch in Cold Tandem Mill Control System

AN Lianxiang1, CAI Zhaojun1, ZHANG Shaoru2, SUN Zixin3, XIAO Ge3   

  1. (1. School of Electrical Engineering, Hebei University of Technology, Tianjin 300130; 2. College of Physics Science and Information Engineering, Hebei Normal University, Shijiazhuang 050016; 3. New BRP Electrical Equipment Co., Ltd., Beijing 100055)
  • Received:1900-01-01 Revised:1900-01-01 Online:2006-10-20 Published:2006-10-20

摘要: 论述了在1 520mm酸连轧计算机控制系统中,人机界面组态软件InTouch 8.0的设计思想和高级编程实例。介绍了计算机控制系统的硬件配置,信息通信方式;叙述了组态软件InTouch的应用特色,给出了自编的函数应用范例。

关键词: 计算机控制系统, 组态软件InTouch, 设计, 编程

Abstract: This article mainly discusses a configuration software InTouch, whose design idea and advanced programming in the pickling line couples with the 5 stands cold mill computer control system. It sketches out the hardware configuration and signal communication method. It introduces the application feature of InTouch, and also gives some examples of function.

Key words: Computer control system, Configuration software InTouch, Design, Programming