作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2006, Vol. 32 ›› Issue (22): 232-233. doi: 10.3969/j.issn.1000-3428.2006.22.083

• 工程应用技术与实现 • 上一篇    下一篇

混凝土外加剂生产线自动监控系统的设计

孙荣霞1,高敬格2,王永青1   

  1. (1. 河北大学电子信息工程学院,保定071002;2. 河北工程大学信息与电气工程学院,邯郸 056038)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-10-20 发布日期:2006-10-20

Design of Automatic Monitoring and Control System for Automatic Production Line of Concrete Activator

SUN Rongxia1, GAO Jingge2, WANG Yongqing1   

  1. (1. College of Electronic and Information Engineering, Hebei University, Baoding 071002;
    2. School of Information and Eletric Engineering, Hebei University of Engineering, Handan 056038)
  • Received:1900-01-01 Revised:1900-01-01 Online:2006-10-20 Published:2006-10-20

摘要: 针对中小型混凝土外加剂生产过程中存在的弊端,提出并实现了一种基于虚拟仪器软件开发平台LabVIEW的计算机自动监控系统。为了避免阻塞,减少运行时间,可靠地执行并行性任务和提高系统性能,软件开发采用多层次、多线程的模块化设计思想,并设置语音提示、故障报警隔离保护、自动/手动控制功能,缩短了系统开发周期,提高了系统的可靠性。

关键词: 混凝土外加剂, 监控, 虚拟仪器, LabVIEW, 多线程

Abstract: This paper proposes and realizes an automatic monitoring and control system based on virtual instrument software development platform LabVIEW. It solves some problems existing in the production process of concrete activator. In order to avoid blocking, reduce running time, carry out parallel tasks at the same time and improve systematic performance reliably, software development adopts the module design philosophy of the multi-level, multithreading, and sets up voice prompt, fault alarm to isolate and protect, automatic/manual control function. As a result, it has shorten systematic development period and improved systematic dependability.

Key words: Concrete activator, Monitor, Virtual instrument, LabVIEW, Multithread