作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2007, Vol. 33 ›› Issue (05): 252-254. doi: 10.3969/j.issn.1000-3428.2007.05.089

• 开发研究与设计技术 • 上一篇    下一篇

高性能通用并行信号处理模块的设计与实现

胡善清,刘 峰,龙 腾   

  1. (北京理工大学电子工程系,北京 100081)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2007-03-05 发布日期:2007-03-05

Design and Realization of High-performance Universal Parallel Signal Processing Module

HU Shanqing, LIU Feng, LONG Teng   

  1. (Department of Electronic Engineering, Beijing Institute of Technology, Beijing 100081)
  • Received:1900-01-01 Revised:1900-01-01 Online:2007-03-05 Published:2007-03-05

摘要: 为满足信号处理领域不断增长的任务需求并适应不同的应用场合,设计高性能通用并行信号处理模块,进而构建各类信号处理系统是一种趋势。基于对共享总线和分布式两种并行结构的理论分析,结合信号处理系统的特点,设计了一种高性能通用并行信号处理模块,它具有标准化、模块化、可扩展、可重构、混合并行模式、多层次互联的特性,通过构建典型信号处理系统验证了这些特性。

关键词: 信号处理, 并行处理, TS201, FPGA

Abstract: In order to satisfy the increasing task needs in signal processing field and to deal with different application occasion, it becomes one tendency to design high-performance universal parallel signal processing module and further to set up series of signal processing systems. Based on the theoretical analysis about shared bus parallel architecture and distributed one, combining with the characteristics of signal processing system, one kind of high-performance universal parallel signal processing module is designed. The module has the characteristics of standardization, modularization, scalability, restructure, hybrid parallel processing pattern, and multi-layer interconnection. These characteristics are validated through constructing the typical signal processing system.

Key words: Signal processing, Parallel processing, TS201, FPGA