作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (1): 247-249. doi: 10.3969/j.issn.1000-3428.2008.01.085

• 工程应用技术与实现 • 上一篇    下一篇

基于Rabbit2000的通用楼宇控制器的设计与实现

任会峰1,阳春华1,程朋胜2   

  1. (1. 中南大学信息科学与工程学院,长沙 410083;2. 深圳达实智能股份有限公司,深圳 518057)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-01-05 发布日期:2008-01-05

Design and Implementation of General Building Controller Based on Rabbit2000

REN Hui-feng1, YANG Chun-hua1, CHENG Peng-sheng2   

  1. (1. School of Information Science and Engineering, Central South University, Changsha 410083; 2. Shenzhen DAS Intellitech Co., Ltd., Shenzhen 518057)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-01-05 Published:2008-01-05

摘要: 针对楼宇自动化系统中监控点分散和信号类型多样的特点,采用“自顶向下”的设计思想,设计了一种基于Rabbit2000的,由数据采集模块、输出控制模块和通信接口模块组成的新型通用楼宇控制器,实现多路循环检测与控制以及通过Modbus/TCP工业以太网协议与上位机通信。该楼宇控制器满足楼宇自动化系统的监控要求,性价比高,具有广阔的推广应用前景。

关键词: 楼宇自动化, 楼宇控制器, 以太网接口, 套接字

Abstract: Considering the equipment distribution and various signals existed in building automation systems, a new-style controller based on Rabbit2000 is developeded according to the “Top-Down” scheme, which consists of the modules, such as data acquisition, output control and communication. The controller can detect and control multi-channel input and output independently, and communicate with superior computer by Modbus/TCP. The building controller satisfies the requirements of building automation system and possesses high performance-cost ratio and popularizing value.

Key words: building automation, building controller, Ethernet interface, Socket

中图分类号: