作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (5): 246-147,. doi: 10.3969/j.issn.1000-3428.2008.05.086

• 工程应用技术与实现 • 上一篇    下一篇

基于Nios II的LCD驱动IP核的设计

向 荣1,陈祖希1,霍伟伟2   

  1. (1. 桂林电子科技大学信息科技学院,桂林 541004;2. 桂林电子科技大学管理学院,桂林 541004)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-03-05 发布日期:2008-03-05

Design of IP Core for LCD Driver Based on Nios II

XIANG Rong1, CHEN Zu-xi1, HUO Wei-wei2   

  1. (1. School of Information & Technology, Guilin University of Electronic Technology, Guilin 541004; 2. School of Management, Guilin University of Electronic Technology, Guilin 541004)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-03-05 Published:2008-03-05

摘要: 针对不同型号液晶屏之间的驱动差异问题,提出一种基于Nios II的LCD驱动的IP核设计方法。研究基于NIOS II的LCD驱动IP核的体系结构及其软件实现过程。经过测试,所设计的LCD驱动IP核能够应用于不同型号的液晶屏,且运行稳定。

关键词: Nios II处理器, IP核, LCD驱动

Abstract: Aiming at the difference of drivers among kinds of LCD, this paper proposes a designing method of driving IP core by LCD based on Nios II. The paper focuses on designing structure and realizing process of IP core for LCD driver based on NIOS II. According to the test, the IP core designed by this method can be applied on different LCDs and runs stably.

Key words: Nios II, IP core, LCD driver

中图分类号: