作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (7): 269-271. doi: 10.3969/j.issn.1000-3428.2008.07.095

• 开发研究与设计技术 • 上一篇    下一篇

基于推技术的网络化监控报警系统

孙君曼1,2,方华京1,孙慧君3,张梅凤2,4   

  1. (1. 华中科技大学控制科学与工程系,武汉430074;2. 郑州轻工业大学电气与信息学院,郑州450002; 3. 开封空分设备集团公司,开封 475000;4. 大连理工大学信息与控制研究中心,大连 116024)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-04-05 发布日期:2008-04-05

Monitor and Alarming System over Internet Based on Push Technology

SUN Jun-man1,2, FANG Hua-jing1, SUN Hui-jun3, ZHANG Mei-feng2,4   

  1. (1. Department of Control Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074; 2. College of Electric and Information, Zhengzhou Unversity of Light Industry, Zhengzhou 450002; 3. Kaifeng Air Separation Group Co., Ltd., Kaifeng 475000; 4. Research Centre of Information and Control, Dalian University of Technology, Dalian 116024)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-04-05 Published:2008-04-05

摘要: 以LonWorks智能节点为现场层的实际工程为例,阐述网络控制系统的结构,探讨其中的关键技术。研究基于事件驱动的push技术,介绍了Java报警服务器。考虑网络带宽的限制及控制系统的实时性要求,在报警系统中采用推技术减轻网络中的信息拥塞、时延等问题,有利于网络化控制系统的稳定性。

关键词: 网络控制系统, 推技术, 报警系统

Abstract: This paper presents a general framework for network control systems, where all Lonworks smart nodes are assumed to be connected through a communication network. On the base of analyzing the monitor and control network system, it introduces the event-drivent push technology in alarming system and Java server. With the limit of network band width and network real-time required on control systems, the design with the push technology can reduce network congestion and network delay then the stability of the network control system is much better.

Key words: network control system, push technology, alarming system

中图分类号: