作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (8): 264-266. doi: 10.3969/j.issn.1000-3428.2008.08.094

• 开发研究与设计技术 • 上一篇    下一篇

嵌入式故障诊断系统监管平台的设计与实现

昌玉芳,欧中红,代 征,方 伟   

  1. (武汉数字工程研究所,武汉 430074)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-04-20 发布日期:2008-04-20

Design and Implementation of Monitoring and Management Platform in Embedded Fault Diagnosis System

CHANG Yu-fang, OU Zhong-hong, DAI Zheng, FANG Wei   

  1. (Wuhan Digital Engineering Institute, Wuhan 430074)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-04-20 Published:2008-04-20

摘要: 紧凑型外围设备互连(CPCI)总线加固计算机是军用装备的重要组成部分,为了实现该设备在工作过程中的实时在线状态监测和故障诊断,该文针对CPCI总线加固计算机的结构,研究其嵌入式故障诊断系统的总体框架和工作原理。设计该故障诊断系统的监管平台,给出该监管平台的硬件及软件实现方案,分析软件系统中各模块的实现过程,并给出相应的实验结果。

关键词: 嵌入式系统, 故障诊断, 远程监测

Abstract: Compact Peripheral Component Interconnect(CPCI) bus ruggedized computer is one of the most important military equipments. For the purpose of monitoring real-time online state and doing fault diagnosis during the equipment works, the architecture and working principle of its embedded fault diagnosis system is studied while considering the structure of CPCI bus computer. This paper designs a monitoring and management platform, and introduces the implementation schemes of its hardware and software, especially the realization of modules in software system. Some experiment results are given.

Key words: embedded system, fault diagnosis, remote monitoring

中图分类号: