作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (12): 28-30. doi: 10.3969/j.issn.1000-3428.2008.12.010

• 博士论文 • 上一篇    下一篇

基于嵌入式系统异构总线的原子协议锥匹配

郑 伟,孟晓风,乔仁晓   

  1. (北京航空航天大学仪器科学与光电工程学院,北京 100083)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-06-20 发布日期:2008-06-20

Atomic Protocol Cone Matching Based on Incompatible Bus of Embedded System

ZHENG Wei, MENG Xiao-feng, QIAO Ren-xiao   

  1. (School of Instrument Science and Optoelectronics Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-06-20 Published:2008-06-20

摘要: 针对异构总线嵌入系统难以进行部件移植和接口互换问题,提出基于嵌入系统异构总线的原子协议锥匹配方法,分析接口协议原子操作,构建协议锥,阐述偶锥模型的相关性和时序特性。在抽象空间中进行协议亲缘进程识别及综合适配,并引导协议空间的接口转换,实现接口的自动匹配。

关键词: 嵌入式系统, 异构总线, 原子协议锥, 接口匹配

Abstract: For the problem that embedded system with incompatible bus are difficult to transplant parts and exchange interface, this paper proposes an atomic protocol cone model to realize interface matching. The atomic operations of interfacing protocol are developed to establish the protocol cone model and its dual cone model, and to give them the operation relation character and timing character. Then the recognition of relative process and protocol synthesis matching are realized in the abstract space. The result guides the conversion of incompatible interface in protocol space afterwards. The method depends less on manual experience and provides the automatic matching technique of incompatible interface.

Key words: embedded system, incompatible bus, atomic protocol cone, interface matching

中图分类号: