作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (18): 233-234. doi: 10.3969/j.issn.1000-3428.2008.18.084

• 工程应用技术与实现 • 上一篇    下一篇

基于SOAP协议的停机坪装卸生产系统

李 鹏,张 浩   

  1. (南方航空公司深圳分公司信息部,深圳 518052)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-09-20 发布日期:2008-09-20

Load and Unload Production System on Parking Apron Based on SOAP Protocol

LI Peng, ZHANG Hao   

  1. (IT Department of Shenzhen Branch, China Southern Airlines Co. Ltd., Shenzhen 518052)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-09-20 Published:2008-09-20

摘要: 为了弥补在停机坪上进行装卸自动化生产的空白,设计了基于PDA无线手持设备,利用无线GPRS网络连接到Internet,并对接到Tang系统的停机坪装卸生产系统,能够完成进出港航班的卸货、配运、交接、动态调舱、拉货、清点等生产操作,改变了以往传统手工作业的生产方式,有效地提高了装卸的生产效率。

关键词: WebService, SOAP协议, 动态调舱, 装卸

Abstract: In order to supply a gap in automatization of load and unload production on parking apron, this paper presents a PDA-based loading production system which connects to Internet by GPRS. It can accomplish all of scheduled flight load, unload, hand-over, dynamic cabin-adjust and unload-check operations by communicating with Tang system, thus can change the traditional manual work mode and greatly improve the load-unload efficience.

Key words: WebService, SOAP protocol, dynamic cabin-adjust, load and unload

中图分类号: