作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (18): 237-238. doi: 10.3969/j.issn.1000-3428.2008.18.086

• 工程应用技术与实现 • 上一篇    下一篇

嵌入式测试系统设计

王 益1,2,耿相铭1,陈 慧2   

  1. (1. 上海交通大学电子信息与电气工程学院,上海 200240;2. 华东计算技术研究所,上海 200233)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-09-20 发布日期:2008-09-20

Design of Embedded Test System

WANG Yi1,2, GENG Xiang-ming1, CHEN Hui2   

  1. (1. School of Electronic Information and Electrical Engineering, Shanghai Jiaotong University, Shanghai 200240;2. East China Research Institute of Computer Technology, Shanghai 200233)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-09-20 Published:2008-09-20

摘要: 论述了针对车载加固计算机的各种接口设计的嵌入式测试系统。描述了系统的设计需求、功能框图以及软件的设计流程。该设计为车载加固计算机的各种接口测试提供了新的思路。设计实现了使用一台便携式测试设备提供车载加固计算机的各种常用接口测试功能。该设备具有性能稳定、构成简单、方便易用、成本低廉的特点,可以代替以往测试中所使用的各种分离卡件。

关键词: 嵌入式系统, 测试设备, 接口

Abstract: This paper discusses how to design one kind of embedded system according to the interface of vehicle reinforced computer, describs the design requirement, function block and software flowchart. It provides new idea for testing the interface of vehicle reinforced computer. The equipment designed provides some kinds of interface that is used normally in vehicle reinforced computer, and it has the benefit of simple made up, convenient usage, low cost, and can replace all kinds of discrete cards that are used in test before.

Key words: embedded system, test equipment, interface

中图分类号: