作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (23): 36-37,7. doi: 10.3969/j.issn.1000-3428.2008.23.014

• 软件技术与数据库 • 上一篇    下一篇

基于Protopas的自动柜台机仿真

陈筱斐1,史杏荣2   

  1. (1. 中国科学技术大学软件学院,合肥 230051;2. 中国科学技术大学信息科学与技术学院,合肥 230027)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-12-05 发布日期:2008-12-05

ATM Simulation Based on Protopas

CHEN Xiao-fei1, SHI Xing-rong2   

  1. (1. School of Software Engineering, University of Science and Technology of China, Hefei 230051; 2. School of Information Science and Technology, University of Science and Technology of China, Hefei 230027)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-12-05 Published:2008-12-05

摘要: 通过对国内外已有的仿真软件的调查研究,发现用于模拟和仿真金融自助设备硬件的软件并不常见。该文提出用软件模拟仿真硬件的解决方案,设计和实现一个基于金融自助设备应用开发平台Protopas的自动柜台机仿真系统。该系统使上层应用软件开发人员避免了复杂的硬件操作,有效地加快ATMC项目开发的速度,降低软件开发的成本。

关键词: Protopas系统, 仿真系统, 自助设备

Abstract: After the research of existing emulator, it shows that the emulator for the hardware of self-service equipment is difficult to find. In view of the problem. This paper proposes an solution by software simulating. A simulation system based on Protopas is designed and implemented. The system makes application developer avoid the complex operation on the hardware. As a result, it can make the development work of ATMC application projects more effective, and it can also reduces the cost of software development greatly.

Key words: Protopas system, simulation system, self-service equipment

中图分类号: