计算机工程 ›› 2008, Vol. 34 ›› Issue (24): 253-255.doi: 10.3969/j.issn.1000-3428.2008.24.088

• 开发研究与设计技术 • 上一篇    下一篇

HC08系列微控制器编程调试器通用性设计

刘晓升,曹金华,沈安东   

  1. (苏州大学计算机与科学技术学院,苏州215006)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-12-20 发布日期:2008-12-20

Universal Design of Programmer & Debugger Based on HC08 Family MCU

LIU Xiao-sheng, CAO Jing-hua, SHEN An-dong   

  1. (School of Computer Science and Technology, Soochow University, Suzhou 215006)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-12-20 Published:2008-12-20

摘要: 针对HC08系列不同型号微控制器在编程调试时的差异,提出HC08微控制器通用编程调试器的总体设计方案,给出通用性的软、硬件设计要点,介绍基于不同目标微控制器的擦写子程序的设计思想和实现方法。实验结果表明,该方案实现的编程调试器适用于HC08全系列的微控制器,通用性较好。

关键词: 微控制器, 编程器, 调试器, MON08接口

Abstract: Based on the differences of programming and debugging on microcontrollers of HC08 family, this paper presents a universal design model of programmer and debugger, expounds universal design elements of software and hardware, explains how to design and realize the sub-routines of erasing or writing flash in details. Experimental result shows that the programmer and debugger is applicable to HC08 family Micro Controller Unit(MCU) with good universality.

Key words: Micro Controller Unit(MCU), programmer, debugger, MON08 interface

中图分类号: