作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2009, Vol. 35 ›› Issue (2): 271-273. doi: 10.3969/j.issn.1000-3428.2009.02.095

• 开发研究与设计技术 • 上一篇    下一篇

基于部件分解的三维服装人体建模

朱紫阳1,施霞萍1,陈家训2   

  1. (1. 东华大学计算机科学与技术学院,上海 200051;2. 东华大学信息科学与技术学院,上海 200051)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-01-20 发布日期:2009-01-20

Mannequin Modeling for 3D Dress Based on Part Separation

ZHU Zi-yang1, SHI Xia-ping1, CHEN Jia-xun2   

  1. (1. College of Computer Science and Technology, Donghua University, Shanghai 200051; 2. College of Information Science and Technology, Donghua University, Shanghai 200051)
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-01-20 Published:2009-01-20

摘要: 提出基于部件分解的三维服装人体建模方法,通过去噪处理和人体特征点识别使三维人体扫描数据分解为若干部件,对各个部件进行曲线拟合插值处理,将其组合成完整人体模型。利用该方法建立的三维服装人体模型库为非接触人体测量和体型分析、三维服装设计与模拟展示等电子化量身定制应用提供了支持。

关键词: 人体建模, 去噪, 部件分解, 电子化量身定制

Abstract: This paper describes the development of a prototype system using part-separation for constructing a feature human model, which is to be stored in a 3D digital mannequin database for electronic Made To Measure(eMTM). Subjects like noise filtering, key features extraction, part separation and mesh construction are introduced. In order to demonstrate the functionality of mannequins, some applications are given at the end of the paper.

Key words: mannequin modeling, noise filtering, part separation, electronic Made To Measure(eMTM)

中图分类号: