作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2009, Vol. 35 ›› Issue (15): 241-243. doi: 10.3969/j.issn.1000-3428.2009.15.084

• 开发研究与设计技术 • 上一篇    下一篇

虚拟物体间多点接触力再现研究

张忠辉,丑武胜   

  1. (北京航空航天大学机械工程及自动化学院,北京 100083)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-08-05 发布日期:2009-08-05

Research on Force Display for Multipoint Contacts Among Virtual Objects

ZHANG Zhong-hui, CHOU Wu-sheng   

  1. (School of Mechanical Engineering & Automation, Beijing University of Aeronautics & Astronautics, Beijing 100083)
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-08-05 Published:2009-08-05

摘要: 提出一种基于凸多面体间多点接触的虚拟力计算和再现方法,通过计算凸多面体的离散曲率,提取特征点并检测物体间的多点接触、边面接触和面面接触情况,在此基础上计算它们之间的虚拟力和摩擦力,同时输出到力觉交互设备。仿真实验结果表明,该方法能够有效体现凸多面体多点接触的力特征。

关键词: 虚拟力计算, 多点接触, 凸多面体, 离散曲率

Abstract: A virtual force computing and display method based on multipoint contacts among convex polyhedron is proposed, which computes discrete curvature of convex polyhedron to extract character points, and detect some contacts cases, such as multipoint contacts, edge-surface contacts, and surfaces contacts. On the basis of it, the virtual force and friction forces between them are computed, and is transmitted to force sense interactive equipment. Simulation experimental results demonstrate this method can show the force character of convex polyhedron effectively.

Key words: virtual force computation, multipiont contact, convex polyhedron, discrete curvature

中图分类号: