作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2009, Vol. 35 ›› Issue (17): 244-246. doi: 10.3969/j.issn.1000-3428.2009.17.084

• 开发研究与设计技术 • 上一篇    下一篇

基于Pro/E的产品模型管理及重用性设计

杜淑幸,贾建援,刘小院,胡雯婧   

  1. (西安电子科技大学机电工程学院,西安 710071)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-09-05 发布日期:2009-09-05

Product Model Management and Reusing Design Based on Pro/E

DU Shu-xing, JIA Jian-yuan, LIU Xiao-yuan, HU Wen-jing   

  1. (School of Mechano-electronic Engineering, Xidian University, Xi’an 710071)
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-09-05 Published:2009-09-05

摘要: 提出一种合理有效利用Pro/E的二次开发方法,以工程中常用的齿轮、轴承、弹簧等标准件和常用件为例,创建内嵌于Pro/E、便于进行人机交互的产品模型管理及零部件重用的设计系统,为产品的快速设计与CAD集成提供有效技术支持。该方法已应用到实际产品研发中,取得了较好的效果。

关键词: 重用性设计, 模型管理, 常用件

Abstract: This paper presents a re-development method towards appropriate and effective use of Pro/E. By using popular parts such as gears, axletrees and springs as examples, a product model management and part and components reuse designing system is built up. This system is embedded in Pro/E and is man-computer interactive. It provides effective technological support and implementation approaches towards fast product design and CAD integration. This method is applied the customized development on a product, and makes good effect.

Key words: reusing design, model management, frequent-used parts

中图分类号: