作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2009, Vol. 35 ›› Issue (19): 236-238. doi: 10.3969/j.issn.1000-3428.2009.19.079

• 工程应用技术与实现 • 上一篇    下一篇

基于龙芯平台的EBoot设计与实现

吴少刚,丰大强   

  1. (中国石油大学(华东)计算机与通信工程学院,东营 257601)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-10-05 发布日期:2009-10-05

Design and Implementation of EBoot Based on Godson Platform

WU Shao-gang, FENG Da-qiang   

  1. (College of Computer and Communication Engineering, China University of Petroleum(East China), Dongying 257601)
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-10-05 Published:2009-10-05

摘要: 在龙芯平台上支持Windows CE,对于龙芯处理器在更广泛领域的产业化应用具有重要意义。基于龙芯2E开发平台,设计一个具有可移植性的Windows CE的EBoot基本架构,并最终实现Windows CE的EBoot。实验结果表明,该方案在功能和稳定性上满足Windows CE的要求。

关键词: 以太网引导程序, 龙芯, WishBone总线协议, 嵌入式系统

Abstract: Supporting Windows CE on the Godson-based platform, has an important significance to expanse the field of industrialization application for Godson processors. This paper presents the design of a portable basic architecture for EBoot of Windows CE, and the implement of the EBoot of Windows CE. Experimental results show that this plan satisfies the functions and stability requirements of Windows CE on the platform for Godson.

Key words: Ethernet Boot(EBoot) loader, Godson, WishBone bus protocol, embedded system

中图分类号: