计算机工程 ›› 2009, Vol. 35 ›› Issue (20): 246-248.doi: 10.3969/j.issn.1000-3428.2009.20.087

• 开发研究与设计技术 • 上一篇    下一篇

基于知识重用的服装CAD系统

金 鹏1,2,刘俊中1,2,马翠霞1,滕东兴1   

  1. (1. 中国科学院软件研究所,北京 100190;2. 中国科学院研究生院,北京 100049)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-10-20 发布日期:2009-10-20

Garment CAD System Based on Knowledge Reuse

JIN Peng1,2, LIU Jun-zhong1,2, MA Cui-xia1, TENG Dong-xing1   

  1. (1. Institute of Software, Chinese Academy of Sciences, Beijing 100190; 2. Graduate University of Chinese Academy of Sciences, Beijing 100049)
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-10-20 Published:2009-10-20

摘要: 针对当前CAD软件对设计知识重用支持不足且大多基于WIMP交互方式等问题,设计并实现一个基于知识重用的服装工艺设计系统。该系统框架主要包括知识推荐和知识编辑2个模块。针对知识推荐和知识编辑,分别提出基于草图相似性的实时知识推荐算法和基于笔手势的知识编辑方法,给出系统的应用实例。该系统已应用于北京某羊绒企业的生产中,实践表明该系统能改善人机交互,提高设计效率。

关键词: 知识重用, 知识推荐, 计算机辅助设计

Abstract: The current CAD software lacks of designing knowledge reuse, and most of them are based on WIMP interaction. This paper designs and implements a garment CAD system based on knowledge reuse, whose architecture includes knowledge recommendation module and knowledge editing module. In the knowledge recommendation phase, it proposes a real-time knowledge recommendation algorithm based on similarity calculation of pen sketch. In the knowledge editing phase, it provides a knowledge editing method based on pen gesture, and gives the application instance of the system. This system is used in a cashmere factory in Beijing, and the practice proves this system can improve human-computer interaction experience, and improve the design efficiency.

Key words: knowledge reuse, knowledge recommendation, CAD

中图分类号: