作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2009, Vol. 35 ›› Issue (21): 238-241. doi: 10.3969/j.issn.1000-3428.2009.21.080

• 工程应用技术与实现 • 上一篇    下一篇

面向PCB装配过程跟踪的RFID中间件

田世勇,吴立辉,孙 磊,张 洁   

  1. (上海交通大学计算机集成制造研究所,上海 200240)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-11-05 发布日期:2009-11-05

Radio Frequency Identification Middleware for PCB Assembly Process Tracking

TIAN Shi-yong, WU Li-hui, SUN Lei, ZHANG Jie   

  1. (Computer Integrated Manufacturing Research Institute, Shanghai Jiaotong University, Shanghai 200240)
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-11-05 Published:2009-11-05

摘要: 针对PCB装配生产跟踪不实时、产品追溯效率低的问题,引入无线射频识别(RFID)技术标识物料和产品,提出基于RFID的PCB生产跟踪。研究RFID中间件技术,结合PCB装配的特点确定中间件的功能模块及各模块间交互的信息,设计各模块的处理流程。实验结果表明,该RFID中间件提高了数据采集能力,为PCB生产过程跟踪奠定了基础。

关键词: 无线射频识别, RFID中间件, PCB装配

Abstract: With high automation level, PCB assembly industry is circumscribed by the product marking while it intends to improve its production tracking. To change this, this paper uses Radio Frequency Identification(RFID) to mark the materials and the products instead of barcode as before. It defines the functions of RFID middleware, defines the information exchange between the function modules and develops the middleware. All this make product tracking system more efficient.

Key words: Radio Frequency Identification(RFID), RFID middleware, PCB assembly

中图分类号: