作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2010, Vol. 36 ›› Issue (18): 243-244. doi: 10.3969/j.issn.1000-3428.2010.18.084

• 工程应用技术与实现 • 上一篇    下一篇

基于VxWorks的RapidIO-IP设计与实现

黄振中,倪 明,柴小丽   

  1. (华东计算技术研究所,上海 200233)
  • 出版日期:2010-09-20 发布日期:2010-09-30
  • 作者简介:黄振中(1985-),男,硕士研究生,主研方向:嵌入式计算技术;倪 明、柴小丽,研究员

Design and Implementation of RapidIO-IP Based on VxWorks

HUANG Zhen-zhong, NI Ming, CHAI Xiao-li   

  1. (East-China Institute of Computer Technology, Shanghai 200233, China)
  • Online:2010-09-20 Published:2010-09-30

摘要:

在研究RapidIO互连标准和TCP/IP协议的基础上,设计RapidIO-IP架构,分析VxWorks操作系统中END的工作原理和SBC8641D平台上RapidIO总线的工作机制,对基于RapidIO的END驱动需要实现的几个关键技术进行攻克,成功实现了RapidIO-IP,为RapidIO协议在嵌入式系统中的应用奠定了基础。

关键词: TCP/IP协议, apidIO-IP架构, ND驱动, apidIO协议

Abstract:

Based on the study of the RapidIO interconnect standard and TCP/IP protocol, the RapidIO-IP architecture is designed, and the principle of END in VxWorks operating system and the working mechanism of RapidIO bus in SBC8641D platform are analyzed. While solving a number of key technologies which are needed to implement on END driver based on RapidIO bus, this paper implements RapidIO-IP successfully, and provides a basis for the application of RapidIO protocol in the embeded system.

Key words: TCP/IP protocol, RapidIO-IP architecture, END driver, RapidIO protocol

中图分类号: