作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2010, Vol. 36 ›› Issue (19): 277-279,282. doi: 10.3969/j.issn.1000-3428.2010.19.099

• 开发研究与设计技术 • 上一篇    下一篇

可重构路由交换平台中的构件分类检索方法

曲 剑,汪斌强,曲 晶,刘 强   

  1. (国家数字交换系统工程技术研究中心,郑州 450002)
  • 出版日期:2010-10-05 发布日期:2010-09-27
  • 作者简介:曲 剑(1982-),男,硕士研究生,主研方向:下一代网络架构,构件的分类检索;汪斌强,教授、博士生导师;曲 晶,讲师、硕士;刘 强,博士研究生
  • 基金资助:
    国家“863”计划基金资助项目(2008AA01A323)

Component Classification and Retrieval Method on Reconfigurable Routing Switching Platform

QU Jian, WANG Bin-qiang, QU Jing, LIU Qiang   

  1. (National Digital Switching System Engineering & Technological R&D Center, Zhengzhou 450002, China)
  • Online:2010-10-05 Published:2010-09-27

摘要: 针对可重构路由交换平台构件库中构件检索效率不高的现状,提出一种基于刻面的软硬件构件分类方法。基于该方法设计误差反向传播神经网络构件检索算法,分析表明该算法具有并行性强、效率高、速度快的特点,适合规模大、构成复杂的构件库检索问题。仿真结果证明,在构件数量较多的情况下,该算法性能优于传统检索算法。

关键词: 可重构由, 构件分类, 构件检索, 神经网络

Abstract: Aiming at lower efficiency of components retrieval from component database in reconfigurable network routing platform, a component classification method of software and hardware based on facet is presented. Then a component retrieval algorithm based on Back Propagation Neutral Networks(BPNN) is designed. It is analyzed that the algorithm fits for component database with large size and complicated constitution because of its parallel execution, high efficiency and speed. It is indicated that the algorithm improves the retrieval performance in contrast with most of current retrieval algorithms by the emulation, especially on large size component database.

Key words: reconfigurable, routing, component classification, component retrieval, neural network

中图分类号: