作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2011, Vol. 37 ›› Issue (8): 102-104. doi: 10.3969/j.issn.1000-3428.2011.08.035

• 网络与通信 • 上一篇    下一篇

光纤通道流量控制的OPNET仿真模型设计

蔡昭权 1,秦磊华 2,罗 伟 1,卢庆武 1   

  1. (1. 惠州学院教育技术中心,广东 惠州 516007;2. 华中科技大学计算机科学与技术学院,武汉 430074)
  • 出版日期:2011-04-20 发布日期:2012-10-31
  • 作者简介:蔡昭权(1970-),男,教授、硕士,主研方向:网络存储系统,数据库技术,信息安全;秦磊华,副教授、博士;罗 伟、卢庆武,高级工程师、硕士
  • 基金资助:

    广东省科技计划基金资助项目(2008B010200002)

Design of OPNET Simulation Model for Fibre Channel Flow Control

CAI Zhao-quan 1, QIN Lei-hua 2, LUO Wei 1, LU Qing-wu 1   

  1. (1. Educational Technology Center, Huizhou University, Huizhou 516007, China; 2. School of Computer Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China)
  • Online:2011-04-20 Published:2012-10-31

摘要:

通过分析光纤通道流量控制协议的基本工作原理,提出一个基于OPNET的光纤通道流量控制协议仿真模型,给出发送端和接收端节点模型及进程模型的设计方案,并在OPNET环境下利用C语言实现该模型。仿真实验结果证明其可以正确地执行光纤通道流量控制协议,且模型简单直观、可扩展性好。

关键词: 光纤通道, 流量控制, 进程模型, 仿真模型, OPNET仿真软件

Abstract:

By analyzing the fundamental working tenet concerning the flow control agreement of the Fibre Channel(FC), this paper proposes an OPNET-based simulation model for controlling the flow of FC. The design program models the process nodes of sending and receiving. Simulation results show that the model proposed can abide by the flow control agreement of FC precisely with the advantages of simplicity, straghtforwardness and extensibility under the environment of OPNET and using C programming language as the development tool.

Key words: Fibre Channel(FC), flow control, process model, simulation model, OPNET simulation software

中图分类号: