作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2008, Vol. 34 ›› Issue (14): 98-100. doi: 10.3969/j.issn.1000-3428.2008.14.035

• 网络与通信 • 上一篇    下一篇

无线传感器网络汇聚节点的研究与实现

杨志义,张要伟,李志刚,乔红军,张保华   

  1. (西北工业大学计算机学院,西安 710072)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-07-20 发布日期:2008-07-20

Research and Implementation of Wireless Sensor Network Sink Node

YANG Zhi-yi, ZHANG Yao-wei, LI Zhi-gang, QIAO Hong-jun, ZHANG Bao-hua   

  1. (College of Computer, Northwestern Polytechnical University, Xi’an 710072)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-07-20 Published:2008-07-20

摘要: 研究无线传感器网络中汇聚节点的设计原则,分析汇聚节点的特性与需求,进行器件的选型。基于PXA270低功耗嵌入式处理器的设计实现了具有串口、以太网、USB和CF等多扩展接口的汇聚节点硬件平台。给出引导加载程序的过程,并在自主设计的硬件平台上实现了Blob的移植。

关键词: 无线传感器网络, 汇聚节点, 引导加载程序

Abstract: This paper proposes the design principle of sink node of the Wireless Sensor Network(WSN), analyzes the characteristic and requirement of the sink node, and makes the choice of devices. Based on the low power consuming PXA270 embedded processor, a hardware platform of sink node is implemented with serial port, Ethernet, USB host and CF card interface. The boot process of boot loader is analyzed elaborately, and the porting of Blob in the hardware platform is implemented.

Key words: Wireless Sensor Network(WSN), sink node, boot loader

中图分类号: