作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2009, Vol. 35 ›› Issue (19): 260-262,. doi: 10.3969/j.issn.1000-3428.2009.19.087

• 开发研究与设计技术 • 上一篇    下一篇

基于SOPC的宽幅喷墨打印机控制系统

廖 强1,文 荣1,夏 洋2,延 威1,罗 建1   

  1. (1. 重庆大学机械工程学院,重庆 400044;2. 海景喷绘广告有限公司,重庆 400010)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2009-10-05 发布日期:2009-10-05

Wide Format Ink-jet Printer Control System Based on SOPC

LIAO Qiang1, WEN Rong1, XIA Yang2, YAN Wei1, LUO Jian1   

  1. (1. School of Mechanical Engineering, Chongqing University, Chongqing 400044; 2. Haijing Printing and Advertisement Co., Ltd., Chongqing 400010)
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-10-05 Published:2009-10-05

摘要: 针对宽幅喷墨打印机大量图像数据的传输和处理、系统运动控制器的复杂算法实现及产品后续的升级开发等问题,采用Nios II嵌入式软核处理器为核心,通过添加外围相应的存储、通信及控制模块,设计基于可编程片上系统的宽幅喷墨打印机控制系统。实验结果表明,该系统集成度高、对大量图像数据的传输和处理速度快、工作可靠性好。

关键词: 宽幅喷墨打印机, 控制系统, 可编程片上系统

Abstract: Aiming at the problems of processing and transmitting huge image data for wide format ink-jet printer, realizing the complex algorithm for the system movement controller and succeeding products upgrade and exploitation, Nios II processor is used as the core of the embedded system. This paper designs a wide format ink-jet printer control system based on System On Programmable Chip(SOPC) by adding peripheral memory component, communication component and control parts. Experimental result shows that the system has high integration, good performance of processing and transmitting huge image data, and high reliability.

Key words: wide format ink-jet printer, control system, System On Programmable Chip(SOPC)

中图分类号: