作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2007, Vol. 33 ›› Issue (12): 280-282. doi: 10.3969/j.issn.1000-3428.2007.12.098

• 开发研究与设计技术 • 上一篇    下一篇

基于Eclipse平台的边界扫描测试软件的开发

林金晓1,陈伟男2,周学功2,彭澄廉2,吴荣泉3   

  1. (1. 复旦大学软件学院,上海 200433;2. 复旦大学计算机与信息技术系,上海 200433;3. 华东计算技术研究所,上海 200233)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2007-06-20 发布日期:2007-06-20

Development of Eclipse Based Boundary-scan Tester Software

LIN Jinxiao1, CHEN Weinan2, ZHOU Xuegong2, PENG Chenglian2, WU Rongquan3   

  1. (1. School of Software, Fudan University, Shanghai 200433; 2. Department of Computing and Information Technology, Fudan University, Shanghai 200433; 3. East-China Institute of Computer Technology, Shanghai 200233)
  • Received:1900-01-01 Revised:1900-01-01 Online:2007-06-20 Published:2007-06-20

摘要: 复旦大学研制的类蜂巢结构快速样机平台(HLRESP)采用模块化结构,可以灵活配置和选择功能模块,而扫描链路的设计,以及扫描链路的完整性测试和互连测试对平台极为重要,为了满足该系统的测试和调试的需要,该文设计并实现了一个基于Eclipse平台的边界扫描测试软件。该软件能够自动生成测试向量,分析响应数据并准确定位故障。

关键词: 边界扫描, 互连测试, Eclipse, JTAG, 插件开发

Abstract: Honeycomb-like rapid embedded system platform (HLRESP) is developed by Fudan university. This platform is in modularized structure, and it can configure module blocks freely. For the sake of the system test and debugging, the design of boundary-scan and the integrality test and interconnect test of boundary-scan is very important to the platform. A boundary-scan tester software is designed based on Eclipse for this system test and debugging. This software can build the test vectors automatically, analyze the response data and locate fault accurately.

Key words: Boundary-scan, Interconnect test, Eclipse, JTAG, Plug-in

中图分类号: