作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2010, Vol. 36 ›› Issue (15): 225-227. doi: 10.3969/j.issn.1000-3428.2010.15.080

• 工程应用技术与实现 • 上一篇    下一篇

EPA一致性与互操作性测试系统设计

田民杰1,冯冬芹2,应群民1,潘丽萍1   

  1. TIAN Min-jie1, FENG Dong-qin2, YING Qun-min1, PAN Li-ping1
  • 出版日期:2010-08-05 发布日期:2010-08-25
  • 作者简介:田民杰(1984-),女,硕士研究生,主研方向:工业以太网,上位机系统;冯冬芹,教授;应群民、潘丽萍,副教授
  • 基金资助:
    国家“863”计划基金资助项目(2006AA040301, 2007 AA041301)

Design of EPA Conformance and Interoperability Test System

TIAN Min-jie1, FENG Dong-qin2, YING Qun-min1, PAN Li-ping1   

  1. (1. College of Electrical Engineering, Zhejiang University, Hangzhou 310027; 2. Institute of Cyber-Systems and Control, Zhejiang University, Hangzhou 310027)
  • Online:2010-08-05 Published:2010-08-25

摘要: 针对工业控制领域的开放性问题,通过分析现场总线一致性与互操作性测试原理,设计和实现一个EPA一致性与互操作性测试系统,阐述该系统在功能、程序框架以及测试流程等方面的设计思想,针对测试前的输入文件进行规范设计。利用该系统对基于EPA标准的产品进行一致性与互操作性测试,实验结果验证了该设计方案的可行性。

关键词: EPA标准, 一致性测试, 互操作性测试

Abstract: Aiming at the opening up problem in the field of industrial control, by analyzing the principles of conformance and interoperability test for field bus, this paper designs and implements an EPA conformance and interoperability test system, and expresses its design ideas in the function, procedures framework and test process. Input specification documents before test are designed. Consistency and interoperability test on the products based on EPA standard with the system verifies the feasibility of the design scheme.

Key words: EPA standard, conformance test, interoperability test

中图分类号: