作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2010, Vol. 36 ›› Issue (23): 285-287. doi: 10.3969/j.issn.1000-3428.2010.23.096

• 开发研究与设计技术 • 上一篇    下一篇

窄带干扰抑制的跳时序列构造方法

孙辉,伊锐   

  1. (信息综合控制国家重点实验室,成都 610036)
  • 出版日期:2010-12-05 发布日期:2010-12-14
  • 作者简介:孙辉(1986-),女,硕士,主研方向:信号处理;伊锐,高级工程师

TimeHopping Sequence Construction Method with

SUN Hui,YI Rui   

  1. (National Information Control Laboratory, Chengdu 610036, China)
  • Online:2010-12-05 Published:2010-12-14

摘要: 针对基于脉位调制的跳时宽带信号与其带宽内其他窄带系统存在相互干扰的问题,提出在期望的频段上形成凹口的跳时序列构造方法,并描述该方法的具体步骤。仿真实验结果表明,该方法通过构造合适的跳时序列,能在一定程度上控制功率谱密度的分布,达到共享频带的目的。

关键词: 窄带干扰抑制, 凹口形成, 跳时序列, 功率谱密度分布

Abstract: Aiming at the question that mutual interference exists between timehopping wideband signal based on pulse position modulation and other systems occupying the same band, several code construction methods that allow to place a notch or a zero in a expected frequency are introduced. The specific steps are given. Simulation results prove that spectrum can be controlled by timehopping sequence to some extent.

Key words: narrowband interference suppression, notch shaping, timehopping sequence, spectrum density distribution

中图分类号: