作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2011, Vol. 37 ›› Issue (8): 268-270. doi: 10.3969/j.issn.1000-3428.2011.08.093

• 开发研究与设计技术 • 上一篇    下一篇

基于广义模块库的自动武器网络化快速设计

楼 俐 1,徐 诚 1,王永娟 1,张飞猛 2   

  1. (1. 南京理工大学机械工程学院,南京 210094;2. 中国人民解放军炮兵学院远火及兵器工程系,合肥 230031)
  • 出版日期:2011-04-20 发布日期:2012-10-31
  • 作者简介:楼 俐(1982-),女,博士研究生,主研方向:计算机辅助设计,智能化设计;徐 诚,教授、博士生导师;王永娟,副教授、博士;张飞猛,教授
  • 基金资助:

    国家部委基金资助项目

Networked Rapid Design for Automatic Weapons Based on Generalized Module Library

LOU Li 1, XU Cheng 1, WANG Yong-juan 1, ZHANG Fei-meng 2   

  1. (1. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China; 2. Department of Long-range Rocket and Ordance Engineering, Artillery Academy of PLA, Hefei 230031, China)
  • Online:2011-04-20 Published:2012-10-31

摘要:

在自动武器三维模块化参数化程序的基础上,从支持网络化快速设计的角度出发,通过对自动武器共享协同设计的特殊需求进行分析,建立网络协同设计模块库管理系统模型,介绍自动武器快速设计系统的三维模型共享协同设计流程,给出保证数据传递完整性及快速性的模型多线程传输及基于层次结构的装配文件压缩处理等关键技术的实现方法。

关键词: 自动武器设计, 网络化快速设计, 广义模块化, CAD二次开发技术, 协同设计

Abstract:

Based on the modularized and parametric design, a model of module library management system is presented considering the special demand of collaborative sharing mode for supporting networked rapid design of automatic weapons. The design procedure for 3D models of rapid design platform of automatic weapons is described. In order to transfer data accurately and effectively, the multi-thread transferring method of models and compression program based on hierarchy of assemblies are put forward and realized ultimately.

Key words: automatic weapons design, networked rapid design, generalized modularization, re-developing technology of CAD, collaborative design

中图分类号: