作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2011, Vol. 37 ›› Issue (14): 251-253. doi: 10.3969/j.issn.1000-3428.2011.14.085

• 工程应用技术与实现 • 上一篇    下一篇

基于FSM的紧凑型回旋加速器控制系统研究

胡 啸 a,秦 斌 a,李 冬 a,胡桐宁 b   

  1. (华中科技大学 a. 电气与电子工程学院;b. 电子与信息工程系,武汉 430074)
  • 收稿日期:2010-12-20 出版日期:2011-07-20 发布日期:2011-07-20
  • 作者简介:胡 啸(1986-),男,硕士,主研方向:回旋加速器控制系统设计;秦 斌,讲师、博士;李 冬、胡桐宁,博士研究生
  • 基金资助:

    国家自然科学基金资助项目(10905025)

Research on Control System of Compact Cyclotron Based on Finite State Machine

HU Xiao a, QIN Bin a, LI Dong a, HU Tong-ning b   

  1. (a. College of Electronic and Electric Engineering; b. Department of Electronics and Information Engineering,Huazhong University of Science and Technology, Wuhan 430074, China)
  • Received:2010-12-20 Online:2011-07-20 Published:2011-07-20

摘要:

针对CYCHU-10紧凑型低能强流回旋加速器的实际运行需求,基于有限状态机理论,提出一种层次化的加速器控制系统设计方法,在Simulink环境下利用Stateflow完成系统建模和仿真。仿真结果表明,该设计能全面反映加速器中的动态逻辑关系,可用性及可靠性较强。

关键词: 有限状态机, CYCHU-10回旋加速器, 控制系统, Stateflow工具, 系统建模

Abstract:

Aiming at the actual operation requirements of CYCHU-10 cyclotron, based on Finite State Machine(FSM) theory, this paper proposes a hierarchic design method for cyclotron control system, models and simulates the system with Stateflow under Simulink environment. Simulation result indicates that it is easy to reflect the dynamic logic of a complex system with the method, and it has strong usability and reliability.

Key words: Finite State Machine(FSM), CYCHU-10 cyclotron, control system, Stateflow tool, system modeling

中图分类号: