检索
E-mail
RSS
作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2011, Vol. 37 ›› Issue (18): 233-235.doi: 10.3969/j.issn.1000-3428.2011.18.078

• 图形图像处理 • 上一篇    下一篇

曲面多通道立体投影系统及其配准方法

周圣川 1,2，马纯永 1，韩 勇 1，张 涛 3，陈 戈 1   

  1. (1. 中国海洋大学信息科学与工程学院，山东 青岛 266100；2. 煤炭资源与安全开采国家重点实验室，北京 100083； 3. 中国科学院光电研究院，北京 100190)
  • 收稿日期:2011-02-14 出版日期:2011-09-20 发布日期:2011-09-20
  • 作者简介:周圣川(1986－)，男，硕士研究生，主研方向：虚拟现实，图像处理；马纯永，博士；韩 勇、张 涛，教授、博士；陈 戈，教授、博士生导师
  • 基金项目:

    国家自然科学基金资助重点项目(40730530)；科技人员服务企业行动基金资助项目(2009GJA00047)；煤炭资源与安全开采国家重点实验室开放课题基金资助项目(SKLCRSM09KFB02)

Curved Surface Multi-channel Stereoscopic Projection System and Its Registration Method

ZHOU Sheng-chuan 1,2, MA Chun-yong 1, HAN Yong 1, ZHANG Tao 3, CHEN Ge 1   

  1. (1. College of Information Science and Engineering, Ocean University of China, Qingdao 266100, China; 2. State Key Laboratory of Coal Resources and Safe Mining, Beijing 100083, China; 3. Academy of Opto-Electronics, Chinese Academy of Sciences, Beijing 100190, China)
  • Received:2011-02-14 Online:2011-09-20 Published:2011-09-20

PDF

1549

被引次数

3 | 1

摘要： 为解决曲面投影图像的几何失真和立体感畸变问题，设计并实现一个曲面多通道立体投影系统。该系统利用透视投影校正非线性失真，通过重投影变换对立体投影图像进行精确配准，基于NURBS曲面拟合得到投影形状的立体投影，采用图形处理单元的加速技术实现多通道间的实时边缘融合。实验结果表明，该系统具有较高的校正精度和较快的渲染速度。

关键词: 立体投影, 几何校正, 透视投影, 重投影变换, NURBS曲面

Abstract: This paper designs and complements a curved surface multi-channel stereoscopic projection system to correct geometric distortion in curved surface display system and provides high accurate registration in stereoscopic projection. It maps curved projection surface to the imaginary plane through perspective transformation, converts the plane to render coordinate through re-projection transformation. By constructing a NURBS surface according to the re-projection result, the geometric distortion and biases of stereo images can be resolved in an effective and accurate way. High-performance edge blending is achieved by using Graphics Processing Unit(GPU) accelerating technology. Experimental result indicates that the system has high calibration precision and rendering speed.

Key words: stereoscopic projection, geometric calibration, perspective projection, re-projection transformation, NURBS curved surface

中图分类号: