作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2011, Vol. 37 ›› Issue (21): 244-245,257. doi: 10.3969/j.issn.1000-3428.2011.21.083

• 工程应用技术与实现 • 上一篇    下一篇

传动实验平台电力测功机监控系统设计

沈爱弟,康 伟,高迪驹,刘 昭   

  1. (上海海事大学航运技术与控制工程交通行业重点实验室,上海 201306)
  • 收稿日期:2011-05-23 出版日期:2011-11-05 发布日期:2011-11-05
  • 作者简介:沈爱弟(1957-),男,高级工程师,主研方向:交流传动控制系统,现场总线技术;康 伟、高迪驹,博士研究生;刘 昭,助理工程师
  • 基金资助:
    上海市重点学科建设基金资助项目(S30602);上海市科委创新行动计划基金资助重大项目(09170501900)

Design of Electronic Dynamometer Monitoring System for Drive Experiment Platform

SHEN Ai-di, KANG Wei, GAO Di-ju, LIU Zhao   

  1. (Key Laboratory of Marine Technology and Control Engineering Ministry of Communications, Shanghai Maritime University, Shanghai 201306, China)
  • Received:2011-05-23 Online:2011-11-05 Published:2011-11-05

摘要: 为实现传动实验平台电力测功机的实时监控,提出基于以太网和Profibus-DP现场总线的双层网络监控系统。设计测功机的转矩控制模型,在Delphi和SQL Server编程环境下,引入可控制过程的对象连接与嵌入方式实现数据通信、多线程和ActiveX数据对象等技术,以完成监控软件的开发。实验结果表明,该监控系统工作稳定,能够精确控制转矩。

关键词: 电力测功机, Profibus-DP现场总线, 转矩控制, 对象连接与嵌入, 多线程

Abstract: Dynamometer of drive experimental platform features high real-time performance. A new type of dynamometer monitoring and control system for drive experiment platform is presented, which is based on a dual-network of Ethernet and Profibus-DP. A torque control model is proposed to meet the requirement of the dynamometer. Under programming environment of Delphi and SQL Server, the monitoring and control software is developed with technologies of Object Linking and Embedding(OLE) for Process Control(OPC) communication, multi-thread and ActiveX Data Objects(ADO). Experimental results show that, this monitoring and control system can run steadily, control torque accurately.

Key words: electronic dynamometer, Profibus-DP field-bus, torque control, Object Linking and Embedding(OLE), multithreading

中图分类号: