作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2012, Vol. 38 ›› Issue (11): 221-224. doi: 10.3969/j.issn.1000-3428.2012.11.068

• 工程应用技术与实现 • 上一篇    下一篇

工业物联网拓扑发现协议的设计与实现

季 杰a,白瑞林a,b,陈大峰b,唐 超b   

  1. (江南大学 a. 智能控制研究所;b. 轻工过程先进控制教育部重点实验室,江苏 无锡 214122)
  • 收稿日期:2011-08-23 出版日期:2012-06-05 发布日期:2012-06-05
  • 作者简介:季 杰(1987-),男,硕士研究生,主研方向:物联网技术,网络安全;白瑞林,教授、博士生导师;陈大峰,硕士研究生;唐 超,学士
  • 基金资助:
    国家自然科学基金资助项目(60804013);江南大学产学 研合作基金资助项目“嵌入式机器视觉关键技术的研究与开发”(011002)

Design and Implementation of Topology Discovery Protocol for Industrial Internet of Things

JI Jie   a, BAI Rui-lin   a,b, CHEN Da-feng   b, TANG Chao   b   

  1. (a. Institute of Intelligent Control; b. Key Laboratory of Advanced Process Control for Light Industry, Ministry of Education, Jiangnan University, Wuxi 214122, China)
  • Received:2011-08-23 Online:2012-06-05 Published:2012-06-05

摘要: 为识别工业物联网中的哑设备,提出一种基于不完全知识定理的拓扑发现协议。利用不完全知识定理定义哑设备判定规则,设计网络拓扑图生成算法,通过广度优先原则遍历整个网络,根据地址分配表的包含关系得到哑设备的个数和连接情况。测试结果表明,该协议的拓扑发现速度较快、哑设备识别率较高。

关键词: 不完全知识网络, 拓扑发现, 哑设备, 令牌网, 工业物联网

Abstract: In order to identify the dumb equipments in industrial Internet of Things(IOT), this paper proposes a topology discovery protocol based on incomplete knowledge of principles. It defines decision rules for dumb equipments based on incomplete knowledge of principles and designs network topology generation algorithm. It searches whole network by breadth-first, and gets numbers and connection condition of dumb equipments. Test result shows that the topology has faster discovery speed and higher recognition rate for dumb equipments.

Key words: incomplete knowledge network, topology discovery, dumb equipment, token network, industrial Internet of Things(IOT)

中图分类号: