作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2012, Vol. 38 ›› Issue (24): 100-104. doi: 10.3969/j.issn.1000-3428.2012.24.024

• 网络与通信 • 上一篇    下一篇

基于并行冗余协议的网络拓扑快速发现方法

李 周,刘 健,程子敬   

  1. (航天恒星科技有限公司,北京 100086)
  • 收稿日期:2012-02-17 修回日期:2012-04-17 出版日期:2012-12-20 发布日期:2012-12-18
  • 作者简介:李 周(1983-),男,硕士研究生,主研方向:网络安全;刘 健、程子敬,研究员

Fast Network Topology Discovery Method Based on Parallel Redundancy Protocol

LI Zhou, LIU Jian, CHENG Zi-jing   

  1. (Space Star Technology Co., Ltd., Beijing 100086, China)
  • Received:2012-02-17 Revised:2012-04-17 Online:2012-12-20 Published:2012-12-18

摘要: 针对冗余以太网网络拓扑发现的实时性问题,提出一种基于并行冗余网络协议的网络拓扑结构快速发现方法,包括在网络管理端根据网络需求,发送拓扑发现请求报文,端系统设备在接收到请求之后周期性地向管理端发送拓扑发现报文,管理端根据接收到的报文信息进行运算,从而得到网络的拓扑结构。通过OMNET++网络仿真软件进行仿真验证,结果表明,该方法的网络拓扑构建时间维持在 60 ms,并且实现了与简单网络管理协议的兼容。

关键词: 冗余以太网, 并行冗余协议, 拓扑发现, 端系统, 管理端

Abstract: As for the real-time problem exists in the redundancy network, this paper presents a fast network topology discovery method based on Parallel Redundancy Protocol(PRP). According to the network requirements, a request packet is sent by the network management system, the agent is sending the topology discovery packet when it receives the packet. Based on the results processed by the network management system, people can obtain the network topology. The method is demonstrated by the platform of OMNET++, results show that time of the network topology discovery is about 60 ms, and this method is compatible with Simple Network Management Protocol(SNMP).

Key words: redundancy Ethernet, Parallel Redundancy Protocol(PRP), topology discovery, end system, management end

中图分类号: