作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程

• 开发研究与工程应用 • 上一篇    下一篇

用于验证工艺开发包的测试芯片自动生成流程

刘得金,史 峥,胡龙跃   

  1. (浙江大学超大规模集成电路设计研究所,杭州 310027)
  • 收稿日期:2013-01-30 出版日期:2014-02-15 发布日期:2014-02-13
  • 作者简介:刘得金(1988-),男,硕士研究生,主研方向:电子设计自动化技术;史 峥,副教授;胡龙跃,硕士研究生
  • 基金资助:
    国家自然科学基金资助项目“面向28-14nm的高空间分辨率工艺偏差在线检测关键技术研究”(61204111)

Test Chip Automatic Generation Flow for Process Development Verification

LIU De-jin, SHI Zheng, HU Long-yue   

  1. (Institute of VLSI Design, Zhejiang University, Hangzhou 310027, China)
  • Received:2013-01-30 Online:2014-02-15 Published:2014-02-13

摘要: 在工艺开发包的验证过程中,需要手动地在版图编辑器中对参数化单元进行实例化和摆放绕线,由此产生大量测试芯片。为此,提出一种用于验证工艺开发包的测试芯片自动生成流程,采用软件接口产生Skill脚本和工艺开发包交互,以获取工艺开发包的信息、发送命令对工艺开发包进行操作的方法,能自动地对参数化单元予以实例化,自动地摆放绕线,并实现测试芯片版图的布局规划。用该软件接口针对某代工厂的40 nm半导体工艺开发包开发一套测试芯片,产生一条测试芯片的平均时间为5.2 s左右,结果证明该方法是有效的,能缩短工艺开发包的验证时间。

关键词: 工艺开发包, 测试芯片, 参数化单元, 实验数据设计, 可制造性设计, 电子设计自动化

Abstract: For the problem that there are lots of works to do including instantiating and placing and routing parameterized cells to generate huge amount of test chips in the layout editor manually in the process development verification flow, an automatic flow of test chip generation for process development verification is raised. A software interface that generates skill script is used to get information about process development and communicate with and send command to them. The method can help instantiate and place and route parameterized cells as well as floor planning automatically. The software interface is used to develop test chips for a 40 nm semiconductor technology process design kits. The average time to generate a test chip by this software interface is 5.2 s. The result approves that the method is efficient and can decrease the time to verify process design kits.

Key words: process development, test chip, parameterized cell, design of experimental data, design of manufacturability, electronic design automation

中图分类号: