计算机工程 ›› 2010, Vol. 36 ›› Issue (2): 33-35.doi: 10.3969/j.issn.1000-3428.2010.02.012

• 软件技术与数据库 • 上一篇    下一篇

无线传感器网络终端引导程序设计

刘 浩1,邹雪城1,李 鹏2,刘 明1,任红强1   

  1. (1. 华中科技大学电子科学与技术系,武汉 430074;2. 珠海高凌信息科技有限公司,珠海519060)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-01-20 发布日期:2010-01-20

BootLoader Design for Terminal in Wireless Sensor Network

LIU Hao1, ZOU Xue-cheng1, LI Peng2, LIU Ming1, REN Hong-qiang1   

  1. (1. Department of Electronic, Science and Technology, Huazhong University of Science and Technology, Wuhan 430074;2. Zhuhai Comleader Information Science and Technology Co., Ltd., Zhuhai 519060)
  • Received:1900-01-01 Revised:1900-01-01 Online:2010-01-20 Published:2010-01-20

摘要: 针对无线自组织对等网络的结构特点及对无线可移动终端的需求,分析Linux操作系统的启动过程,给出无线传感器网络可移动终端5段式引导程序的设计方法,对引导程序实现的4个关键环节的配置和设计进行说明。调试结果表明引导程序可成功地运行在自主设计的无线终端硬件平台上。

关键词: 自组织网络, 无线传感器网络, 移动终端, 引导程序

Abstract: Focusing on the structural characteristics of the wireless self-organization network and the requirements of wireless mobile terminal, a five-stage BootLoader design approach for mobile terminal based on Linux in wireless sensor network is derived. The approach can make starting flow of BootLoader program design more clearly. This paper analyzes configure and design methods of four key issues in BootLoader program implementation. The results show that the 5-stage BootLoader program can normally run in the self-design terminal platform.

Key words: self-organization network, wireless sensor network, mobile terminal, BootLoader

中图分类号: