作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2010, Vol. 36 ›› Issue (17): 28-29. doi: 10.3969/j.issn.1000-3428.2010.17.010

• 软件技术与数据库 • 上一篇    下一篇

通用的安全苛求软件安全性测试方法

喻 钢1,2,熊 静3,徐中伟2   

  1. (1. 上海大学悉尼工商学院,上海 201800;2. 同济大学电子与信息工程学院,上海 201804; 3. 上海工程技术大学航空运输学院,上海 201620)
  • 出版日期:2010-09-05 发布日期:2010-09-02
  • 作者简介:喻 钢(1977-),男,讲师、博士研究生,主研方向:安全软件形式化建模、测试与仿真;熊 静,讲师、硕士;徐中伟,教授、博士、博士生导师
  • 基金资助:
    国家自然科学基金资助项目(60674004);铁道部科技研究开发计划基金资助项目(2008X003-A, 2009X002-A)

General Safety Test Method of Safety-critical Software

YU Gang1,2, XIONG Jing3, XU Zhong-wei2   

  1. (1. Sydney Institute of Language and Commerce, Shanghai University, Shanghai 201800; 2. College of Electronics and Information Engineering, Tongji University, Shanghai 201804; 3. School of Air Transportation, Shanghai University of Engineering Science, Shanghai 201620)
  • Online:2010-09-05 Published:2010-09-02

摘要: 传统的测试脚本语言与测试策略不能满足安全苛求软件系统的测试需求,针对该问题,基于安全苛求软件测试的需求提出一种安全性测试方法,使用场景-事件驱动的安全性测试策略,设计基于该策略的安全性测试脚本语言。高速铁路既有线车站列控中心软件的安全性仿真测试结果证明了该方法的有效性。

关键词: 安全苛求软件, 自动化测试, 安全性测试

Abstract: The traditional test script language and test strategy can not satisfy the test requirement of safety-critical software test. Aiming at this problem, based on the requirement of the safety-critical software testing, this paper proposes a new safety test method, which uses safety test strategy based on scenario-event and designs a new safety test script language based on the new strategy. The safety test simulation results of the train control center of existing line show the validity of the method.

Key words: safety-critical software, automatic test, safety test

中图分类号: