作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2012, Vol. 38 ›› Issue (14): 231-233. doi: 10.3969/j.issn.1000-3428.2012.14.069

• 工程应用技术与实现 • 上一篇    下一篇

基于USB设备的全数字时钟恢复单元设计

张 俊,沈海斌   

  1. (浙江大学超大规模集成电路设计研究所,杭州 310027)
  • 收稿日期:2011-10-11 出版日期:2012-07-20 发布日期:2012-07-20
  • 作者简介:张 俊(1986-),男,硕士研究生,主研方向:集成电路设计;沈海斌,教授

Design of All-digital Clock Recovery Unit Based on USB Device

ZHANG Jun, SHEN Hai-bin   

  1. (Institute of VLSI Design, Zhejiang University, Hangzhou 310027, China)
  • Received:2011-10-11 Online:2012-07-20 Published:2012-07-20

摘要: 针对通用串行总线(USB)全速设备中的常用时钟恢复方法存在精度差、成本高的问题,设计一种适用于USB全速设备的全数字时钟恢复单元。包含用于从USB总线数据中提取时间信息的模块,以及数字控制振荡器,能够克服因芯片工作条件不同而产生的不良影响。该设计采用全数字电路的设计流程,使用标准单元库进行逻辑综合和布局布线,设计结果满足USB协议要求。

关键词: 通用串行总线, 时钟恢复, 全数字电路, 标准单元库, 数字控制振荡器, 可重用性

Abstract: This paper designs a kind of all-digital clock recovery unit based on USB full speed device to solve the problem that common clock recovery methods in USB full speed device are low accuracy or high cost. This clock recovery unit contains a module which can extract timing messages from USB bus data, and uses the digitally-controlled oscillator which can overcome the bad effect by the chip’s different operating conditions. The design uses the all-digital circuit design processes, logic synthesis and P&R process of which is based on the standard cell library. The result of this design satisfies the USB specification’s requirements.

Key words: Universal Serial Bus(USB), clock recovery, all-digital circuit, standard cell library, digitally-controlled oscillator, reusability

中图分类号: