Abstract:
System connection or communication rate of different groupwares in a system becomes a bottleneck which blocks the improvement of system performance in typical embedded system. This paper describes the difficulty that current bus encounters, introduces the protocol and application of high-speed SRIO interface and researches the application of SRIO in system connection of multi-processor and the loading technology based on SRIO. The experiment implements reading and writing operation in multi-DSP which can stably work at the rate of 3.125 Gb/s for every channel. The efficiency achieves 86%. The DSP can be loaded through SRIO.
Key words:
system connection,
serial RapidIO(SRIO),
DSP loading
摘要: 在典型的嵌入式系统中,系统内不同组件之间的通信速率成为制约嵌入式系统性能的瓶颈。针对传统共享总线遇到的困难,通过分析高速串行RapidIO(SRIO)接口协议及其应用,研究SRIO在多处理器系统互连中的应用及基于SRIO的加载技术。利用该协议实现的多DSP读写操作的速率达到每通道3.125 Gb/s,效率达到86%,DSP可通过SRIO实现加载。
关键词:
系统互连,
串行RapidIO,
DSP加载
CLC Number:
ZHANG Juan, SU Hai-Bing, TUN Qin-Zhang. High-speed RapidIO Based on Multi-processor[J]. Computer Engineering, 2010, 36(18): 238-239.
张娟, 苏海冰, 吴钦章. 基于多处理器的高速RapidIO[J]. 计算机工程, 2010, 36(18): 238-239.