参考文献
[ 1 ] Liepa P. Filling Holes in Meshes [ C ] / / Proc. of
Eurographics Symposium on Geometry Processing.
Airela-Ville,Switzerland:[s. n. ],2003:200-205.
[ 2 ] Zhao Wei,Gao Shuming,Lin Hongwei. A Robust Hole-
Filling Algorithm for Triangular Mesh [J]. The Visual
Computer,2007,23(12):987-997.
[ 3 ] 王小超,曹俊杰,刘秀平,等. 波前法在三角网格孔洞
修补中的应用[J]. 计算机辅助设计与图形学报,
2011,23(6):1048-1054.
[ 4 ] Chui C K,Lai Minjun. Filling Polygonal Holes Using C1 Cubic Triangular Spline Patches [ J]. Computer Aided
Geometric Design,2000,17(4):297-307.
[ 5 ] Jun Y. A Piecewise Hole Filling Algorithm in Reverse
Engineering[J]. Computer-aided Design,2005,37(2):
262-270.
[ 6 ] Li Gen,Ye Xiuzi, Zhang Sanyuan. An Algorithm for
Filling Complex Holes in Reverse Engineering [ J ].
Engineering with Computers,2008,24(2):119-125.
[ 7 ] Piegl L A, Tiller W. Filling n-sided Regions with
NURBS Patches [ J ]. The Visual Computer,1999,15
(2):77-89.
[ 8 ] Pernot J P,Moraru G,Véron P. Filling Holes in Meshes
Using a Mechanical Model to Simulate the Curvature
Variation Minimization [ J ]. Computers & Graphics,
2006,30(6):892-902.
[ 9 ] Davis J,Marschner S R,Garr M,et al. Filling Holes in
Complex Surfaces Using Volumetric Diffusion [ C ] / /
Proc. of the 1st International Symposium on 3D Data
Processing, Visualization, and Transmission. Padua, Italy:[s. n. ],2002:428-441.
[10] Ju Tao. Robust Repair of Polygonal Models [J]. ACM
Transactions on Graphics,2004,23(3):888-895.
[11] Chen C Y,Cheng K Y. A Sharpness-dependent Filter for
Recovering Sharp Features in Repaired 3D Mesh Models
[J]. IEEE Transactions on Visualization and Computer
Graphics,2008,14(1):200-212.
[12] Hu Ping,Wang Changsheng,Li Baojun. Filling Holes in
Triangular Meshes in Engineering [ J ]. Journal of
Software,2012,7(1):141-148.
[13] Li Zhong,Mee D S,Walton D J. Polynomial Blending in
a Mesh Hole-filling Application [ J ]. Computer-aided
Design,2010,42(4):340-349.
[14] Li Zhong. An Effective Third-order Local Fitting Patch
and Its Application [ C ] / / Proc. of IEEE International
Conference on Shape Modeling and Applications.
[S. l. ]:IEEE Press,2009:7-14.
[15] Wang Xiaochao, Liu Xiuping, Liu Linfa. Automatic
Hole-filling of CAD Models with Feature-preserving
[J]. Computers & Graphics,2012,36(2):101-110.
编辑 顾逸斐 |