参考文献
[1]龚星如,沈建新,田威.工业机器人的绝对定位误差模型及其补偿算法[J].南京航空航天大学学报,2012,44(1):60-64.
[2]刘振宇,陈英林,曲道奎,等.工业机器人标定技术研究[J].机器人,2002,5(1) :447-450.
[3]王东署,迟健男.机器人运动学标定综述[J].计算机应用研究,2007,24(9):8-11.
(下转第274页)
(上接第268页)
[4]任永杰,邾继贵,杨学友.利用激光跟踪仪对机器人进行标定的方法[J].机械工程学报,2007,43(9):195-200.
[5]李定坤,叶声华,任永杰.机器人定位精度标定技术研究[J].计量学报,2007,28(3):195-200.
[6]叶声华,王一,任永杰.基于激光跟踪仪对机器人运动学参数标定方法标定的方法[J].天津大学学报,2007,40(2):195-200.
[7]Chen Heping,Fuhlbrigge T,Choi S.Practical Industrial Robot Zero Offset Calibration[C]//Proceedings of IEEE Conference on Automation Science and Engineer-ing.Washington D.C.,USA:IEEE Press,2008:516-521.
[8]张建忠.机器人连杆参数的视觉标定[J].制造业自动化,2004,26(11):32-34.
[9]Liu Yong,Xi Ning,Chen Heping,et al.An Automated Method to Calibrate Industrial Robot Joint Offset Using Virtual Line-based Single-point Constraint Approach[C]//Proceedings of IEEE Conference on Intelligent Robots and
Systems.Washington D.C.,USA:IEEE Press,2009:715-720.
[10]Liu Yong,Xi Ning,Zhao Jianguo,et al.Development and Sensitivity Analysis of a Portable Calibration System for Joint Offset of Industrial Robot[C]//Proceedings of IEEE Conference on Intelligent Robots and Systems.Washington
D.C.,USA:IEEE Press,2009:3838-3843.
[11]Levenberg K.A Method for the Solution of Certain Non-linear Problems in Least Squares[J].The Quarterly of Applied Mathematics,1944,2(1):164-168.
[12]Liu Yong,Xi Ning,Yan Shentao,et al.High-accuracy Visual/PSD Hybrid Servoing of Robotic Manipulator[C]//Proceedings of International Conference on Advanced Intelligent Mechatronics.Washington D.C.,USA:IEEE Press,2008:217-222.
编辑顾逸斐 |