计算机工程 ›› 2008, Vol. 34 ›› Issue (16): 249-251.doi: 10.3969/j.issn.1000-3428.2008.16.086

• 工程应用技术与实现 • 上一篇    下一篇

转子自适应动平衡测试系统的研究

张鹏举,陈昆昌,李仁旺,刘海霞,王 莹   

  1. (浙江理工大学机械与自动控制学院,杭州 310018)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-08-20 发布日期:2008-08-20

Research on Rotor Self-adaptive Dynamic Balance Test System

ZHANG Peng-ju, CHEN Kun-chang, LI Ren-wang, LIU Hai-xia, WANG Ying   

  1. (College of Mechanical and Automation Control, Zhejiang Sci-Tech University, Hangzhou 310018)
  • Received:1900-01-01 Revised:1900-01-01 Online:2008-08-20 Published:2008-08-20

摘要: 针对工业中旋转机械的转子不平衡问题,提出基于ARM嵌入式技术的解决方案,研制转子自适应动平衡测试系统,阐述系统硬件的设计思路和软件的实现过程。在转子无试重条件下,该系统根据双面影响系数法和自学习机制,一次得出不平衡量的计算方法。根据转子转速这一关键因素,实现了动平衡测试的自适应过程。

关键词: 刚性转子, 自适应, 影响系数法, 动平衡

Abstract: In allusion to the rotors imbalance problem of revolving machines in the industry, this paper puts forward a solution based on ARM embedded technology and develops a test system of self-adaptive dynamic balance for rotors. The designing thoughts and process of hardware and software are expatiated. The system realizes a method that rotors can gain the unbalanced amounts only once without trial masses, based on two-side influencing coefficient method and self-learning mechanism. Considering a critical factor-rotor speed, the system also realizes a self-adaptive process of dynamic balance test.

Key words: rigid rotor, self-adaptive, influencing coefficient method, dynamic balance

中图分类号: