参考文献 [1]Yang Xuewen,Feng Zuren,Liu Chenyu,et al.A Geometric Method for Kinematics of Delta Robot and Its Path Tracking Control[C]//Proceedings of the 14th International Conference on Control,Automation and Systems.Washington D.C.,USA:IEEE Press,2014:509-514. [2]Wang Ruifang,Wang Xianghai.Research of Trajectory Planning for Delta Parallel Robots[C]//Proceedings of 2013 International Conference on Mechatronic Sciences,Electric Engineering and Computer.Washington D.C.,USA:IEEE Press,2013:814-818. [3]Huang T,Wang P F,Mei J P,et al.Time Minimum Trajectory Planning of a 2-DOF Translational Parallel Robot for Pick-and-place Operations[J].Manufacturing Technology,2007,56(1):365-368. [4]韩军,郝立.机器人关节空间的轨迹规划及仿真[J].南京理工大学学报(自然科学版),2000,24(6):540-543. [5]Silva L A,Sebastian J M,Saltaren R,et al.RoboTenis:Optimal Design of a Parallel Robot with High Performance[C]//Proceedings of 2005 International Conference on Intelligent Robots and Systems.Washington D.C.,USA:IEEE Press,2005:2134-2139. [6]Petrinec K,Kovacic Z.Trajectory Planning Algorithm Based on the Continuity of Jerk[C]//Proceedings of 2007 Mediterranean Conference on Control and Automation.Washington D.C.,USA:IEEE Press,2007:1-5. [7]Piazzi A,Visioli A.Global Minimum-Jerk Trajectory Planning of Robot Manipulators[J].IEEE Transactions on Industrial Electronics,2000,47(1):140-149. [8]黄世国,耿国华.三次样条插值的逆扩散图像增强算法[J].计算机工程,2007,33(12):46-48. [9]Liu Chunshi,Liu Yu,Zhang Yimin.Study of B-spline Interpolation,Correction and Inverse Algorithm[M].Berlin,German:Springer,2012:215-221. [10]李小霞,汪木兰,刘坤,等.基于五次B样条的机械手关节空间平滑轨迹规划[J].组合机床与自动化加工技术,2012(8):39-42. [11]郑庆帅,张洛平.基于B样条插值的医学图像三维重构技术[D].洛阳:河南科技大学,2006. [12]刘松国.六自由度串联机器人运动优化与轨迹跟踪控制研究[D].杭州:浙江大学,2009. [13]付荣,居鹤华.基于粒子群优化的时间最优机械臂轨迹规划算法[J].信息与控制,2012,40(6):802-808. [14]肖文皓,白瑞林,许凡,等.基于信赖域算法的机械臂时间最优轨迹规划[J].传感器与微系统,2013,32(6):77-80. [15]胡长风,刘国栋.基于改进的自适应和声搜索算法的时间最优轨迹规划[J].江南大学学报(自然科学版),2013,12(6):682-687. [16]朱世强,刘松国,王宣银,等.机械手时间最优脉动连续轨迹规划算法[J].机械工程学报,2010,46(3):47-58. 编辑陆燕菲 |