作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2006, Vol. 32 ›› Issue (2): 251-253.

• 开发研究与设计技术 • 上一篇    下一篇

基于 ARM7TDMI 处理器的嵌入式系统启动流程

徐荣珍,李从心,李加文   

  1. 上海交通大学模具CAD 国家工程研究中心,上海 200030
  • 出版日期:2006-01-20 发布日期:2006-01-20

Embedded System Based on ARM7TDMI-Cored Microprocessor

XU Rongzhen, LI Congxin, LI Jiawen   

  1. National Die and Mould CAD Engineering Research Center, Shanghai Jiaotong University, Shanghai 200030
  • Online:2006-01-20 Published:2006-01-20

摘要: 以Samsung 公司基于ARM7TDMI 核的S3C44B0X 微处理器为例,介绍了嵌入式系统开发调试的一般过程,并就嵌入式系统启动流程的实现进行讨论,该方法在作者自主开发的目标板上通过了测试。

关键词: ARM7TDMI;S3C44B0X;嵌入式系统;启动

Abstract: The general developing and debugging process of embedded system is discussed with an emphasis on the details of initializing process by using ARM7TDMI-cored microprocessor S3C44B0X as an example. The method mentioned in this paper is tested valid on self-developed board

Key words: ARM7TDMI; S3C44B0X; Embedded system; Initialization