作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2007, Vol. 33 ›› Issue (05): 187-189. doi: 10.3969/j.issn.1000-3428.2007.05.067

• 人工智能及识别技术 • 上一篇    下一篇

一种抗几何畸变的景象匹配方法

胡礼勇,杨小冈,缪 栋   

  1. (第二炮兵工程学院303教研室,西安 710025)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2007-03-05 发布日期:2007-03-05

Method of Anti Geometric Distortion for Scene Matching

HU Liyong, YANG Xiaogang, MIAO Dong   

  1. (303 Teaching and Research Section, The Second Artillery Engineering College, Xi’ an 710025)
  • Received:1900-01-01 Revised:1900-01-01 Online:2007-03-05 Published:2007-03-05

摘要: 在分析景象匹配实时图获取过程中几何畸变产生原因的基础上,利用弹上高度传感器和姿态角传感器获取的图像高度和姿态信息,实现了畸变实时图的几何校正,给出了校正实时图大小和偏移量的确定方法,结合匹配计算和匹配结果修正,提出了一种抗几何畸变的景象匹配方法。仿真实验结果验证了该方法的有效性和实用性。

关键词: 景象匹配, 几何畸变, 实时图, 几何校正

Abstract: Based on the analysis of the reason of geometric distortion in the process of capturing real-time image, utilizing the data acquired by the altitude sensors and the attitude angle sensor, the geometry correction of the distortion in real-time image is realized and a method for confirming the size and the offset of the real-time image is given. With the correction of the matching calculation and its results, a method of anti geometric distortion for scene matching is presented. The validity and the practicability of the method are verified by simulation experiment.

Key words: Scene matching, Geometric distortion, Real-time image, Geometry correction