作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2012, Vol. 38 ›› Issue (7): 243-246. doi: 10.3969/j.issn.1000-3428.2012.07.080

• 工程应用技术与实现 • 上一篇    下一篇

可重构计算混合系统硬件的设计与实现

李美锋,邓庆绪,金 曦,刘柄蔚,孔繁鑫   

  1. (东北大学信息科学与工程学院,沈阳 110004)
  • 收稿日期:2011-07-26 出版日期:2012-04-05 发布日期:2012-04-05
  • 作者简介:李美锋(1989-),男,硕士研究生,主研方向:可重构计算;邓庆绪,教授、博士生导师;金 曦,博士研究生;刘柄蔚,硕士研究生;孔繁鑫,博士研究生
  • 基金资助:
    国家“863”计划基金资助项目“面向可重构计算系统的实时调度问题与操作系统技术的研究”(2007AA01Z181);国家自然科学基金资助项目“多核系统中实时调度策略的设计与分析技术的研究”(60973017);中央高校基本科研业务费专项基金资助项目“支持MPSoC体系结构设计空间探索及软件开发的高性能虚拟系统设计平台”(N100604011);中央高校基本科研业务费专项基金资助项目“基于片上网络的存储器访问性能研究”(N100204001)

Design and Implementation of Reconfigurable Computing Hybrid System Hardware

LI Mei-feng, DENG Qing-xu, JIN Xi, LIU Bing-wei, KONG Fan-xin   

  1. (School of Information Science & Engineering, Northeastern University, Shenyang 110004, China)
  • Received:2011-07-26 Online:2012-04-05 Published:2012-04-05

摘要: 可重构计算系统中软硬件资源的管理缺乏统一的机制,资源不能被有效利用。为此,设计并实现一种硬件任务模型,为上层软件提供统一的硬件接口,使操作系统能够对软硬件任务进行统一管理,并给出硬件任务下载器的实现结构及工作流程。实验结果表明,该硬件任务模型的运行效率较高,硬件任务下载器能较大地提高硬件任务的下载速率。

关键词: 可重构计算, 软硬件混合系统, 现场可编程门阵列, 硬件下载器

Abstract: The management of hardware resources and software resources lacks a unified mechanism. To solve this problem, the hardware part of the reconfigurable computing system is discussed, and a hardware task model with unified interface is proposed to allow the operating system a unified management of hardware and software tasks. An efficient hardware task downloader is designed to increase the download speed of hardware tasks. Experimental results show that the proposed hardware design of the task model is completely feasible and efficient, and hardware task downloader can significantly improve the hardware task download speed.

Key words: reconfigurable computing, software/hardware hybrid system, Field Programmable Gate Array(FPGA), hardware downloader

中图分类号: