作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2011, Vol. 37 ›› Issue (4): 15-17. doi: 10.3969/j.issn.1000-3428.2011.04.006

• 博士论文 • 上一篇    下一篇

支持知识嵌入的设计过程建模

张善辉1,刘震宇2   

  1. (1. 山东大学控制科学与工程学院,济南 250061;2. 二炮士官学校,山东 潍坊 262500)
  • 出版日期:2011-02-20 发布日期:2011-02-17
  • 作者简介:张善辉(1982-),女,讲师、博士,主研方向:产品生命周期管理,过程管理,知识管理;刘震宇,讲师、硕士
  • 基金资助:
    国家“863”计划基金资助项目(2007AA040604, 2007AA 04Z138);山东省博士后创新基金资助项目(200803062)

Design Process Modeling Supporting Knowledge Embedding

ZHANG Shan-hui 1, LIU Zhen-yu 2   

  1. (1. School of Control Science and Engineering, Shandong University, Jinan 250061, China; 2. Second Artillery Non-Commissioned Officer School, Weifang 262500, China)
  • Online:2011-02-20 Published:2011-02-17

摘要: 针对产品设计快速化、模块化、知识化的发展趋势和参数化、重复性等主要特征,提出知识嵌入的概念,建立支持过程、任务流转和参数传递的设计过程模型。其中,改进的设计过程定义元模型在工作流过程定义元模型的基础上,通过引入知识流引擎和知识单元模型,建立知识嵌入的控制机制。原型系统的实现验证了该方法可以有效地管理产品设计过程,实现各类设计知识在任务执行过程中的自动嵌入。

关键词: 设计过程建模, 知识单元, 知识嵌入, 知识流引擎

Abstract: Product design shows the trend of high speed, modularization, knowledge coverage and characteristics of parametric and repeatability. In order to respond to these changes, concept of knowledge embedding is presented, and design process model is constructed to support the transfer of processes, tasks and parameters. Based on workflow process definition meta-model, an improved design process definition meta-model is established with introduction of knowledge-flow engine and knowledge unit model, and the corresponding knowledge embedding control mechanism is founded. A prototype implementation of design process management verifies that this method can effectively manage product design process, and realize knowledge embedding in phases of task execution.

Key words: design process modeling, knowledge unit, knowledge embedding, knowledge-flow engine

中图分类号: