作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2021, Vol. 47 ›› Issue (9): 171-177,184. doi: 10.19678/j.issn.1000-3428.0058324

• 体系结构与软件技术 • 上一篇    下一篇

基于容器技术的电力设备仿真云平台设计与开发

赵宇峰, 雷晟, 张国钢, 耿英三   

  1. 西安交通大学 电力设备电气绝缘国家重点实验室, 西安 710049
  • 收稿日期:2020-05-14 修回日期:2020-08-06 发布日期:2020-08-27
  • 作者简介:赵宇峰(1996-),男,硕士研究生,主研方向为云平台架构设计;雷晟,硕士研究生;张国钢(通信作者)、耿英三,教授、博士。
  • 基金资助:
    国家重点研发计划“智能配电网复杂用电工况下的计量传感和校准技术研究”(2016YFF0201205)。

Design and Development of Container-based Cloud Platform for Power Equipment Simulation

ZHAO Yufeng, LEI Sheng, ZHANG Guogang, GENG Yingsan   

  1. State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an 710049, China
  • Received:2020-05-14 Revised:2020-08-06 Published:2020-08-27

摘要: 针对电力设备设计仿真流程中成本高、计算资源利用效率低等问题,利用Docker容器化技术和Kubernetes容器编排技术,构建基于容器的电力设备仿真云平台。结合仿真云平台的需求,从功能实现、镜像构建、云平台架构等方面设计云平台各模块,并对云平台运行中的关键处理流程进行分析。在此基础上,通过动态构建技术从特性匹配、调度算法等方面对云平台的运行进行优化。应用实例结果表明,基于容器的电力设备仿真云平台能充分发挥云平台的优势,正确地根据用户提供的参数应用模板进行仿真。

关键词: 仿真云平台, 电力设备, 云计算, Docker技术, Kubernetes技术

Abstract: The existing methods for power equipment simulation are costly, and have a low utilization rate of computing resources.To address the problem, a container-based cloud platform for power equipment simulation is constructed using Docker and Kubernetes.Based on the actual requirements, the modules of the cloud platform are designed from the aspects of function implementation, image construction, and cloud platform architecture.In addition, the procedures that are key to the cloud platform operation are analyzed.On this basis, the dynamic building technology is used to optimize the operation of the cloud platform from the aspects of feature matching and the scheduling algorithm.The simulation result shows that the proposed platform uses cloud computing to maximum advantage, and can provide simulation correctly according to the parameters given by users.

Key words: simulation cloud platform, power equipment, cloud computing, Docker technology, Kubernetes technology

中图分类号: