作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程 ›› 2010, Vol. 36 ›› Issue (10): 127-128. doi: 10.3969/j.issn.1000-3428.2010.10.043

• 网络与通信 • 上一篇    下一篇

基于TrueTime的无线网络功率控制系统

赵贤林,逄 滨,沈明霞   

  1. (南京农业大学工学院电气系,南京 210031)
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-05-20 发布日期:2010-05-20

Wireless Network Power Control System Based on TrueTime

ZHAO Xian-lin, PANG Bin, SHEN Ming-xia   

  1. (Dept. of Electrical, College of Engineering, Nanjing Agricultural University, Nanjing 210031)
  • Received:1900-01-01 Revised:1900-01-01 Online:2010-05-20 Published:2010-05-20

摘要: 介绍一种基于Matlab/Simulink的联合仿真工具——TrueTime工具箱,利用该工具箱,并以直流电机为对象,建立一个无线网络控制系统的仿真模型。通过对路径损耗函数的研究,得出信号传输的最远距离。仿真实验结果表明,在信号传输的最远距离内,降低节点的发射功率,可实现对无线网络控制系统节点的功率控制。

关键词: 无线网络控制系统, TrueTime工具箱, 路径损耗, 功率控制

Abstract: The paper introduces an associated simulation tool——TrueTime tool box, using the tool box builds a simulation model of DC motor in Wireless Network Control System(WNCS). The farthest signal transmission distance is obtained through the investigation of path loss function. Simulation experimental result shows that the node power control of WNCS can be realized by reducing the transmit power within the farthest signal transmission distance.

Key words: Wireless Network Control System(WNCS), TrueTime tool box, path loss, power control

中图分类号: