作者投稿和查稿 主编审稿 专家审稿 编委审稿 远程编辑

计算机工程

• 体系结构与软件技术 • 上一篇    下一篇

并行飞机气动模拟工作台软件

吴响 1,2,张鉴 1,邓笋根 1,陆忠华 1,胡晓东 1   

  1. (1.中国科学院计算机网络信息中心,北京 100190; 2.中国科学院大学,北京 100049)
  • 收稿日期:2014-12-16 出版日期:2016-04-15 发布日期:2016-04-15
  • 作者简介:吴响(1986-),男,博士研究生,主研方向为网格计算、高性能计算、计算流体力学;张鉴,副研究员、博士;邓笋根,高级工程师;陆忠华,研究员、博士生导师;胡晓东,博士研究生。
  • 基金资助:

    国家自然科学基金重大研究计划培育基金资助项目“飞行器高雷诺数下气动优化及动边界问题高精度快速算法研究”(91130019);国家自然科学基金资助重点项目“飞机机翼形状优化问题的关键数学理论和快速算法”(91330206);国家“863”计划基金资助项目“真实飞机外型全流场和优化设计数值模拟”(2012AA01A304);中国科学院信息化专项基金资助项目“面向云服务的超级计算环境建设与应用”(XXH2503-02)。

Parallel Workbench Software for Aircraft Aerodynamic Simulation

WU Xiang 1,2,ZHANG Jian 1,DENG Sungen 1,LU Zhonghua 1,HU Xiaodong 1   

  1. (1.Computer Network Information Center,Chinese Academy of Sciences,Beijing 100190,China; 2.University of Chinese Academy of Sciences,Beijing 100049,China)
  • Received:2014-12-16 Online:2016-04-15 Published:2016-04-15

摘要:

针对主流计算流体力学软件计算精度低、并行规模受限等问题,在中国计算流体力学软件CCFDV1.0的基础上,设计一种新的工作台软件。基于开放服务网关协议原理,采用微内核+插件的架构实现批处理作业、双模式控制参数设置、计算过程监控等功能的用户友好操作界面,通过集成7个核心求解模块和一个优化设计模块,提高软件的并行规模。实验结果表明,与主流计算流体力学软件相比,该软件具有较高的计算精度,且并行规模较大。

关键词: 飞机气动模拟, 计算流体力学, 高性能计算, 优化模块, 多目标优化

Abstract:

In view of the low accuracy and limited parallel scale of the major Computational Fluid Dynamics(CFD) software,a new workbench software based on China CFD software CCFDV1.0 is developed in this paper.The software is based on the principle of Open Service Gateway Initiative(OSGI),uses the architecture of Micro-kernel+Plugins and provides batch processing,double-model control arguments,computing monitoring and other user-friendly functions.The parallel scale of the software is improved by integrating 7 core solving modules and an optimized design module.Experimental results show that the parallel workbench software has higher accuracy and larger parallel scale than the major CFD software.

Key words: aircraft aerodynamic simulation, Computational Fluid Dynamics(CFD), high performance computing, optimization module, multi-objective optimization

中图分类号: